D91.29-0003-08
1 | Front seat | 4 | Electrical connector | 7 | Catches | ||
2 | Electrical connector | 5 | Bracket | 8 | Guides | ||
3 | Electrical connector | 6 | Catch hook | 9 | Front seat control unit |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Adjust front seat (1), until front seat control unit (9) is accessible | ||
2 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
3 | Disconnect electrical connectors (2, 3, 4) from front seat control unit (9) | To do so, release electrical connectors (2, 3, 4). | |
4 | Partially remove front seat control unit (9) | Removal: To do so, use suitable tool to release catch hooks (6) on holder (5) (arrows A). Then slide front seat control unit (9) in front area upwards (arrows B). The catches (7) must make contact with catch hook (6) and catch hooks (6). | |
5 | Remove front seat control unit (9) | To do so, remove front seat control unit (9) forwards. | |
Installation: Guides (8) must latch into notches on holder (5). | |||
6 | Install in the reverse order | ||
7 | Commission front seat control unit (9) | When replacing front seat control unit (9) | |
| Connect/disconnect diagnostic unit | ||
8 | Perform normalization of front seat (1) | ||
| Connect/disconnect diagnostic unit | ||
| Check | ||
9 | Perform function check of front seat adjustment |
Powiązane dokumenty
- ad0000d200006ts
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu