ar9125p1820tx

Removing and installing dynamic seat switch

Typ ar · temat 91.25 · wersja 0100 · 2004-11-04

Dotyczy: MODEL 219.3 with CODE (433) Left dynamic seat, incl. multicontour seat with CODE (434) Right dynamic seat, incl. multicontour seat

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.25 Fotel wielokonturowy (MKS) — Seria 219 (modele 3**)

EinPAS 37 Wyposażenie wnętrza › 37.26 Fotel przedni › 37.26.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 219 (modele 3**)

AR91.25-P-1820TX

Removing and installing dynamic seat switch

24.9.04

MODEL 219.3
with CODE (433) Left dynamic seat, incl. multicontour seat
with CODE (434) Right dynamic seat, incl. multicontour seat

Removing and installing dynamic seat switch

Shown on removed driver seat

1 Front seat frame trim

S108 Right front multicontour backrest switch group

S108/1 Right front DYNAMIC switch

S109 Left front multicontour backrest switch group

S109/1 Left front DYNAMIC switch

P91.25-2271-03

Remove/Install

1

Set left or right front seat to the rear and up

See Operating Instructions

2

Unclip right front multicontour backrest switch group (S108) or left front multicontour backrest switch group (S109) from the paneling of the front seat frame (1) using mounting wedge and lift up

*110589035900

3

Disconnect electrical connector from the right front multicontour backrest switch group (S108) or left front multicontour backrest switch group (S109)

4

Press the right front DYNAMIC switch (S108/1) or left front DYNAMIC switch (S109/1) from the rear out of the paneling of the front seat frame (1) and disconnect the electrical connector

5

Install in the reverse order

Removing and installing dynamic seat switch

Mounting wedge

110 589 03 59 00