ar9125p1571fr

Remove/install compressed air reservoir for multicontour seat

Typ ar · temat 91.25 · wersja 0103 · 2019-10-02

Dotyczy: Model 257, 290 with code 432 (Dynamic seats left and right) Model 290 with code 409 (Left and right front multicontour seat)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.25 Fotel wielokonturowy (MKS) — Seria 257 · Seria 290

EinPAS 37 Wyposażenie wnętrza › 37.26 Fotel przedni › 37.26.51 Pompa/ zbiornik — Seria 257 · Seria 290

AR91.25-P-1571FR

Remove/install compressed air reservoir for multicontour seat

02.10.2019

Model

257, 290

with code 432 (Dynamic seats left and right)

Model

290

with code 409 (Left and right front multicontour seat)

Remove/install compressed air reservoir for multicontour seat

Shown on model 257 with code 432 (Left and right dynamic multicontour seat)

1

Pneumatic line

2

Foam material

3

Bolts

4

Compressed air reservoir

P91.25-2654-11

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

Remove/install

1

Remove multicontour seat pneumatic pump.

AR91.25-P-1431FR

2

Disconnect pneumatic lines (1) at compressed-air reservoir (4).

Observe installation position of pneumatic lines (1).

Pliers

*000589043700

3

Press foam material (2) to side until screws (3) are accessible.

4

Unscrew bolts (3).

5

Remove compressed-air reservoir (4).

6

Install in the reverse order

Remove/install compressed air reservoir for multicontour seat

000 589 04 37 00

Pliers

Powiązane dokumenty