Remove/install Bowden cable for backrest release of passenger bench seat

AR91.21-S-7376C

Remove/install Bowden cable for backrest release of passenger bench seat

15.11.2012

MODEL

415.605/7

with CODE U77 (Rear bench seat, 1st row folding 1/3:2/3)

Shown on removed backrest of passenger bench seat

4

Clip

5

Clip

6

Zipper

7

Retainer profile

Shown on removed backrest of passenger bench seat, with backrest padding removed

1

Left lower Bowden cable

3

Right Bowden cable

9

Secondary arrest

2

Left upper Bowden cable

8

Pin

 

Remove/install



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

1

Remove left and right release lever of backrest

AR91.21-S-7370C

2

Remove clip (4)

 Installation: Check clips (4), replace if necessary.

3

Remove clamps (5)

4

Open zippers (6)

 Pliers

*454589013700

5

Unhook retainer profiles (7)

6

Move backrests to basic position

7

Remove pin (8)

 To do so, remove retaining rings.

 Installation: Replace retaining rings.

8

Fold up seat frames and fix in place

 Use a suitable tool.

9

Open cover of secondary lock (9)

 To do so, fold up padding with cover at right lower corner of left backrest and unclip cover.

10

Mark position of sliding piece of secondary lock (9)

11

Remove left and right lock for passenger bench seat

AR91.21-S-3775C

12

Remove left lower Bowden cable (1)

 To do so, unhook left lower Bowden cable (1) from secondary lock (9) and unhook respective elastic band. Mark position and routing of left lower Bowden cable (1).

13

Remove left upper Bowden cable (2)

 To do so, remove cable tie and unhook left upper Bowden cable (2) from secondary lock (9). Mark position and routing of left upper Bowden cable (2).

 Installation: Replace cable tie.

Set left upper Bowden cable (2), see:



Adjust Bowden cable for backrest release of passenger bench seat

AR91.21-S-7376-01C

14

Remove right Bowden cable (3)

 To do so, remove cable tie and unhook respective elastic band. Mark position and routing of right Bowden cable (3).

 Installation: Replace cable tie.

15

Install in the reverse order



Check

16

Perform function test