Unclip catch hooks of handles (4) using a suitable screwdriver (6) as shown and detach handles (4) from release levers (7).
Only slightly lift up tabs (5) of handles (4). Otherwise, the tabs (5) will be overstretched and correct seating of the handles (4) after installation is not ensured.
3
Unclip rear trim (1) and guide out toward left under right trim (3).
Check
4
Check retaining clips (8) for damage.
If a retaining clip (8) is damaged,
Replace damaged retaining clip (8).
Install
5
Fold out pedal arm (10).
6
Guide rear trim (1) under right trim (3), position guides (9) on passenger seat and clip in rear trim (1).
