Serie
pl
ar9121s377103e
Align passenger seat attachment wells
Typ ar · temat 91.21 · wersja 0101 · 2015-11-23
Dotyczy: Model 447.7 with code UR0 (Seat mountings, vis-á-vis posit.,1st rear seat row) Model 447.7 with code UR3 (Seat mount with quick fastener (2 passenger seat rows)) Model 448.7 with code UR3 (Seat mount with quick fastener (2 passenger seat rows))'
Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Umiejscowienie
Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.21 Siedzenia pasażerskie — Seria 447 (modele 7**) · Seria 448 (modele 7**)
EinPAS 37 Wyposażenie wnętrza › 37.28 Fotel pasażerski › 37.28.40 Stelaż fotela/ konsola mocowania — Seria 447 (modele 7**) · Seria 448 (modele 7**)
AR91.21-S-3771-03E
Align passenger seat attachment wells
Model
447.7
with code UR0 (Seat mountings, vis-á-vis posit.,1st rear seat row)
Model
447.7
with code UR3 (Seat mount with quick fastener (2 passenger seat rows))
Model
448.7
with code UR3 (Seat mount with quick fastener (2 passenger seat rows))
Number
Designation
Model 447.7/8, 448
BA91.21-N-1002-01J
Screw/bolt, seat well to underfloor
Nm
45
Remove
1
Carefully remove covers (1) using long wedge.
Measure
2
Using the straightedge (6), determine the height difference (a) at the front end (4) and rear end (5) of the attachment wells (3).
The height difference (a) must not exceed 0.6 mm.
Align
3
Remove screws/bolts (2) from the excessively low attachment well (3) and remove attachment well (3).
4
Position attachment well (3) using an appropriate shim and fasten with screws/bolts (2).
Measure
5
Using the straightedge, determine the height difference at the front end and rear end of the attachment well (3).
The height difference must not exceed 0.6 mm.
If the permitted height difference is not attained.
Repeat alignment.
Install
6
Tighten screws/bolts (2) of the aligned attachment well (3) by applying torque .
