ar9121a4502tsl

Remove/install passenger seat cushion

Typ ar · temat 91.21 · wersja 0101 · 2020-08-11

Dotyczy: Model 907.843 with code S15 (Passenger seats, comfort version) Model 907.843 with code S16 (Passenger seats, luxury version) Model 907.843 with code S17 (Passenger seats, Premium version) Model 907.855 with code S16 (Passenger seats, luxury version) Model 907.857 with code S16 (Passenger seats, luxury version)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.21 Siedzenia pasażerskie — Seria 907 (modele 843, 855, 857)

EinPAS 37 Wyposażenie wnętrza › 37.28 Fotel pasażerski › 37.28.41 Siedzisko fotela — Seria 907 (modele 843, 855, 857)

AR91.21-A-4502TSL

Remove/install passenger seat cushion

29.07.2020

Model

907.843

with code S15 (Passenger seats, comfort version)

Model

907.843

with code S16 (Passenger seats, luxury version)

Model

907.843

with code S17 (Passenger seats, Premium version)

Model

907.855

with code S16 (Passenger seats, luxury version)

Model

907.857

with code S16 (Passenger seats, luxury version)

Remove/install passenger seat cushion

Removal

1

Seat cushion

2

Catch hook

3

Front strut

D91.21-A019-76

Remove/install passenger seat cushion

D91.21-A020-77

Installation

1

Seat cushion

3

Front strut

5

Rear end stop

2

Catch hook

4

Rear strut

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove

1

Use thumbs to carefully push both catch hooks (2) downwards and backwards simultaneously (arrow A) until catch hooks (2) are completely unlocked.


Do not pull up seat cushion (1) before catch hooks (2) are completely unlocked and located behind front strut (3) (arrows B).
Otherwise, the catch hooks (2) will be damaged and the seat cushion (1) must be replaced.

2

Remove seat cushion (1) upwards and forwards.

Check

3

Check catch hooks (2) for damage.

If catch hooks (2) are damaged,

replace seat cushion (1).

Install

4

Slide seat cushion (1) with rear part under seat backrest (arrow D).

Make sure that both rear end stops (5) are in front of the rear strut (4).

5

Position seat cushion (1) on rear strut (4) and front strut (3) (arrows E, F).

Both catch hooks (2) must make contact with the front strut (3) (arrow F). Both rear end stops (5) must make contact with the rear strut (4) (arrow E).

6

Use thumbs to carefully push both catch hooks (2) backwards simultaneously, until both catch hooks (2) are located behind the front strut (3).

7

Push seat cushion (1) downward in front area until catch hooks (2) on front strut (3) are fully engaged (arrow G).

Check

8

Check whether both catch hooks (2) are fully engaged (arrow G).

Powiązane dokumenty