ar9118p1870tx

Remove/install rear seat backrest cover

Typ ar · temat 91.18 · wersja 0100 · 2004-10-11

Dotyczy: MODEL 219.3 except CODE (872) Electrically heated left and right rear seats

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.18 Pokrowce foteli — Seria 219 (modele 3**)

EinPAS 37 Wyposażenie wnętrza › 37.27 Fotel tylny › 37.27.42 Oparcie fotela/zagłówek — Seria 219 (modele 3**)

AR91.18-P-1870TX

Remove/install rear seat backrest cover

27.7.04

MODEL 219.3 except CODE (872) Electrically heated left and right rear seats

Remove/install rear seat backrest cover

P91.18-2184-09

1 Backrest cover

2 Carriers

5 Stitching wires

6 Staple clips

3 Backrest upholstery

4 Terminal strip

Remove/Install

1

Remove rear seat backrest

AR91.12-P-1620TX

2

Remove armrest from rear-seat backrest.

AR91.12-P-1745TX

3

Detach the carriers (2) at the bottom and sides of the backrest upholstery (3)

4

Unhook carriers (2) near the center armrest and pull the backrest cover (1) over

Installation: Guide the backrest cover (1) between the bracket for the center armrest and the backrest upholstery (3) (arrows).

5

Unclip terminal strip (4)

6

Loosen the staple wires (5) in the fabric tubes from the upholstery clips (6)

Installation tool for retaining wire

WF58.50-P-9118-02A

7

Remove backrest cover (1) from the backrest upholstery (3)

Installation: Align rear backrest cover (1) on backrest upholstery (3)

8.1

Pull the upholstery wires (5) out of the fabric tubes of the backrest cover (1)

Only when replacing the backrest cover (1)

9

Install in the reverse order

Powiązane dokumenty