P91.18-2225-07
1 Seat cover
2 Padding
5 Staple clips
6 Staple clips
3 Stitching wires
4 Stitching wire pocket
| Remove/install | ||
1 | Remove left or rear seat cushion | ||
2 | Unclip cover (1) from padding (2) at side | ||
3 | Slip cover (1) over upholstery (2) | ||
4 | Unclip stitching wires (3) from staple clips (5) | Open staple clips (5) with care, otherwise the staple clips (5) may snap off. | |
5 | Remove stitching wires (3) from cover (1) as far as stitching wire pocket (4) | ||
6 | Fold back cover (1) as far as stitching wire pocket (4) | ||
7 | Unclip stitching wire in stitching wire pocket (4) from staple clips (6) | Open staple clips (6) with care, otherwise the staple clips (6) may snap off. | |
8 | Remove the upholstery (1). | ||
9.1 | Remove stitching wires (3) and stitching wire in stitching wire pocket (4) from cover (1) | When fitting new cover (1). | |
10 | Install in the reverse order |