ar9116p0040tx

Remove/install head restraint on front seat

Typ ar · temat 91.16 · wersja 0103 · 2008-05-06

Dotyczy: MODEL 219.3 up to 13.8.07

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.16 Zagłówki — Seria 219 (modele 3**)

EinPAS 37 Wyposażenie wnętrza › 37.26 Fotel przedni › 37.26.42 Oparcie fotela/zagłówek — Seria 219 (modele 3**)

AR91.16-P-0040TX

Remove/install head restraint on front seat

21.4.08

MODEL 219.3 up to 13.8.07

Remove/install head restraint on front seat

P91.16-2287-11

Shown on left front seat with code (275) Memory package (driver seat, steering column, mirrors)

1 Head restraint

M27m4 Head restraint up/down motor (with code (275) Memory package (driver seat, steering column, mirrors))

M28m4 Head restraint up/down motor (with code (242) Electrically adjustable front passenger seat with memory)

Removing

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Remove seat-back lining from left or right front seat backrest

On vehicles with code (242) Electrically adjustable front passenger seat with memory or with code (275) Memory package (driver seat, steering column, mirrors) or on vehicles as of 1.6.05.

AR91.10-P-1910TX

2

Move front seat forward and set front seat backrest at an incline to the rear

3

Switch off the ignition and remove the transmitter key from the EIS control unit

On vehicles as of 1.6.05.

On vehicles with code (889) Keyless-Go, press the Keyless-Go start and stop button repeatedly until the ignition is switched off. Remove the transmitter key from the vehicle and store it at a location beyond its transmission range (at least 2 m).

4

Detach driver NECK-PRO head restraint separation point or front passenger NECK-PRO head restraint separation point and expose relevant electrical line

On vehicles as of 1.6.05.

Note installation position of electrical line and securing clamp.

5

Pull head restraint (1) out of the front seat backrest

On vehicles without code (242) Electrically adjustable front passenger seat with memory or without code (275) Memory package (driver seat, steering column, mirrors), the release on the head restraint guide has to be pressed.

Install

6

Install head restraint (1)

7

Check for correct locking of head restraints (1) in head restraint up/down motor (M27m4) or head restraint up/down motor (M28m4) (arrows)

On vehicles with code (275) Memory package (driver seat, steering column, mirrors) or with code (242) Electrically adjustable front passenger seat with memory

8

Connect driver NECK-PRO head restraint separation point or front passenger NECK-PRO head restraint separation point and position relevant electrical line in front seat backrest

On vehicles as of 1.6.05.

Note installation position of electrical line and securing clamp.

9

Install seat-back lining on front seat backrest

On vehicles with code (242) Electrically adjustable front passenger seat with memory or with code (275) Memory package (driver seat, steering column, mirrors) or on vehicles as of 1.6.05.

AR91.10-P-1910TX

Powiązane dokumenty