S91.12-2518-09
1 Belt buckle
2 Expansion clips
3 Side cover
4 Seat backrest
9 Screw
10 Screw
11 Lever
12 Expansion clamp
5 Seat backrest shell
6 Clamp
7 Armrest
8 Seat upholstery
| Remove/install | ||
1 | Remove seat belt buckle (1) | To unscrew, disconnect plastic cap from bolt head. | |
Installation: Replace bolt. | |||
| |||
2 | Remove expansion clips (2) on both sides and remove side cover (3) | Fold over backrest (4) to remove expansion clips. Press pins of expansion clips inwards. | |
3 | Remove head restraint tubes | ||
4 | Remove seat backrest shell (5) | ||
5 | Remove clamps (6) and remove armrest (7) | The armrest is fixed in place with a clamp (6) that is visible after unhooking the seat cover (8). | |
6 | Remove screws/bolts (9) on the side of the seat | Installation: Ensure that the lever (11) is seated correctly. | |
7 | At the left seat side remove screws/bolts (9) and (10) | ||
8 | Unclip seat cover (8) all-round | Unclip left and right expansion clamps (12). | |
9 | Remove backrest padding | ||
10 | Install in the reverse order |
Seat belts/emergency tensioning retractors