S91.12-2517-11
1 Clamp
2 Seat console
3 Retaining strap
4 Gas pressure strut
5 Retaining bolt
6 Hinge pins
| Removal, installation | ||
1 | Remove seat from vehicle | See operating instructions Fold down backrest. | |
2 | Remove clamp (1) | Position seat with backrest back and relieve tension by pushing back retaining strap (3) on seat console (2). | |
After removing the clamp, the gas pressure strut (4) extends. | |||
3 | Remove retaining bolt (5) | Replace retaining clips | |
4 | Remove left and right hinge pins (6) | Replace retaining clips | |
5 | Remove seat console (2) | ||
6 | Install in opposite order |