S91.12-2508-06
1 Cover
2 Spreading clips
3 Side screw
4 Seat shell
5 Rear screw
6 Plastic wedge
7 Seat shell
8 Clamping element
| Removal, installation | ||
1 | Remove rear seat cushions | ||
2 | Unscrew cover (1) on passage for backrest adjustment | Detach spreading clips (2) | |
3 | Unhook seat spring mat | ||
4 | Unscrew screws (3) at side on bottom seat shell (4) | | |
5 | Unscrew screws (5) below rear seat backrest | | |
Installation: Do not forget plastic wedge (6) when screwing in | |||
6 | Detach connections between side | ||
7 | Remove seat shells (4) toward rear | When replacing the side cover sections detach rear clamping element (8) or separate retaining tab | |
8 | Reinstall in opposite order |
Torx screw set
000 589 01 10 00