AR91.12-S-1020C | Remove/install rear seat cushion | 3.8.00 |
MODEL 638.294 ## as of 328515
Lightweight seats
S91.12-4021-09
1 Plastic clips
2 Covering material
3 Fastening hook
6 Fastening bracket
7 Plastic guide part
4 Link rod
5 Rear seat cushion
| Remove/install | ||
1 | Remove paneling at bottom front on rear seat | ||
2 | Fold down rear seat backrest | See Operating Instructions . | |
3 | Remove plastic clips (1) | Replace damaged plastic clips (1). | |
Press in dowel pin at the plastic clip (1) inward. | |||
4 | Expose covering material (2) | ||
5 | Detach fastening hook (3) at the link rod (4) | ||
6 | Move rear seat backrest into upright position | See Operating Instructions . | |
7 | Release rear seat cushion (5) form the seat frame | Pry off fastening bracket (6) as far as necessary using a suitable tool. | |
Installation: observe guides at the rear seat cushion (5). Rear seat cushion (5) latches in again when pressed down. | |||
8 | Detach plastic guide part (7) at the seat frame | ||
9 | Remove rear seat cushion (5) | ||
10 | Install in the reverse order |