1 | Seat cushion upholstery |
2 | Plug |
3 | Retaining rubber |
4 | Cover |
S91.10-4540-06
| Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Remove trim from front seat frame | MODEL 415.6 | |
2 | Fold seat cushion forward | MODEL 415.6 | |
3 | Partially detach cover (4) of rear backrest |
| |
4 | Remove plug (2) | MODEL 415.6 | |
Installation: Check stop plug (2), replace if necessary. | |||
5 | Unclip retaining rubbers (3) | MODEL 415.6 | |
6 | Disconnect electrical connectors of seat heater | MODEL 415.6 | |
7 | Remove seat cushion padding (1) with cover (4) | To do so, unhook cover (4) at seat frame (arrows). | |
8 | Remove cover (4) from seat cushion padding (1) | Only when replacing cover (4). | |
Cover (4) is secured with velcro fasteners. | |||
Installation: Ensure correct seating. | |||
9 | Install in the reverse order |
Powiązane dokumenty
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ar9110s1095c Demontaż i montaż tapicerki oparcia fotela przedniego
- ar9110s1200c