S91.10-2514-03
1 Seat cushion cover
2 Retaining rod
3 Expanding clip
4 Plastic anchors
5 Cross bar
S91.10-2513-03
| Removal, installation | ||
1 | Move seat to highest position with height adjustment | See operating instructions | |
2 | Remove seat | ||
3 | Remove bottom side covering | ||
4 | Unhook rubber straps on backrest cover | ||
5 | Unhook seat cushion cover (1) at rear | Unhook plastic anchors for seat cushion cover from rear retaining rod (2). | |
6 | Pull out expanding clip (3) | ||
7 | Unclip plastic anchors (4) all the way around | For this purpose turn seat. | |
8 | Remove seat cushion (1) toward front | When removing do not damage upholstery. | |
Installation: Slide seat cushion over rear cross bar (5). | |||
9 | Install in opposite order |