Remove/install cover for backrest at front seat

AR91.10-P-8656MCU

Remove/install cover for backrest at front seat

13.7.10

7.5.10

Remove armrest added

Operation step 4

 

Remove/install

 Danger!

Risk of injury caused by backrest suddenly folding forward if release lever is accidentally operated during inspection and repair work

When working on the seat, be careful not to accidentally release the backrest mechanism allowing the seat to fold forward. Keep body parts clear of the backrest travel area.

AS91.00-Z-0005-01V

1

Remove belt guide

 Installation: When replacing the backrest cover (1), cuts must be made for the belt guide.

See: 

AR91.45-P-0500MCC

Make cuts for belt guide at cover of front seat backrest

AR91.10-P-8656-01MCC

2.1

Remove driver seat

When removing backrest cover (1) from driver seat.

AR91.10-P-1010MCU

2.2

Remove passenger seat

When removing backrest cover (1) from front passenger seat.

AR91.10-P-1020MCU

3

Remove sidebag unit

AR91.60-P-0695MCU

4

Remove center armrest

For vehicles with code (I50) Armrest

or with retrofitted center armrest

AR91.27-P-1000MCC

5

Set seat backrest to vertical position

6

Remove hog rings (5) using suitable side cutting pliers

 Fold up backrest cover (1) piece by piece and remove exposed hog rings (5). A total of 18 hog rings (5) are installed in the marked areas (arrows D).

 Installation: Use new hog rings (5) (arrow B). Place hog ring (5) into
 padding clip pliers,
 hook padding clip pliers into eyelet on plastic rail (6), then hook onto wire of foam part (4) and press together until the hog ring (5) is completely closed (arrow C).

Align seams (7) of backrest cover (1) and position in cutouts in foam section (4).

 Padding clip pliers

*454589033700

7

Take backrest cover (1) up and out

8

Install in the reverse order