Remove/install front seat

AR91.10-P-1000RG

Remove/install front seat

25.04.2018

Model

190

1

Front seat

3

Electrical connector

2

Screw

 Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Remove belt end fitting

AR91.40-P-1030-02A

2

Move front seat (1) forwards and remove rear screws/bolts (2)

 Bolt, seat to vehicle floor

*BA91.10-P-1001-01R

3

Move front seat (1) backwards and remove front screws/bolts (2)

 Bolt, seat to vehicle floor

*BA91.10-P-1001-01R

4

Disconnect battery ground line

AR54.10-P-0003RG

5

Lift front seat (1) and disconnect electrical connectors (3)

6

Remove front seat (1) from vehicle


Carefully lift front seat (1) out of vehicle.
Otherwise components in the vehicle interior may be damaged.

 Installation: Ensure correct seating of the guide rails on the vehicle floor.

 Helper required.

7

Install in the reverse order

 Front seats

Number

Designation

Model 190

BA91.10-P-1001-01R

Bolt, seat to vehicle floor

Nm

50