ar9110p1000k

Removing and installing front seats

Typ ar · temat 91.10 · wersja 0102 · 2010-01-28

Dotyczy: MODEL 208

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.10 Fotele przednie — Seria 208

EinPAS 37 Wyposażenie wnętrza › 37.26 Fotel przedni › 37.26.30 Fotel przedni kompletny — Seria 208

AR91.10-P-1000K

Removing and installing front seats

13.2.97

MODEL 208

Removing and installing front seats

P91.10-0477-06

1 Front seat

2 Head restraint

3 Trim panel

4, 5, 6 and 7 Screws

8 Arresting bolts

9 Seat adjustment rails

 	Removal, installation
1	Remove head restraint (2) and move front seat (1) toward rear
2	Pull off cover (3) on both front seat rails
3	Unscrew screws (4 and 5)		*BA91.10-P-1001-01A
		 Use E12 external Torx socket wrench attachment.
			*000589011000
4	Move front seat toward front and fold front seat backrest forward
5	Unscrew screws (6 and 7)		*BA91.10-P-1001-01A
		 Use E12 external Torx socket wrench attachment.
			*000589011000
6	Remove front seat (1)	 Passenger seat: Separate connector for the seat occupied recognition sensor.
N	Install in opposite order	 Before installing position both seat adjustment rails (9) uniformly to one another. A maximum offset of 4 mm is permissible. Insert arresting bolts (8) into holes in seat mounting console.

 Front seats

Number	Designation		Model 208


BA91.10-P-1001-01A	Screw on seat rail	Nm	50

Removing and installing front seats

TORX bit set

000 589 01 10 00