Remove/install front seat

AR91.10-P-1000HA

Remove/install front seat

11.03.2019

Model

240.1

with code 215 (Partition)

Model

240.1

with code 302 (Partition screen with clear glass)

Model

240.1

with code 303 (Partition with clear window and curtain)

1

Front seat

2

Screw

3

Cover

4

Cover

5

Cover

6

Screw

7

Covers

S108

Right front multicontour backrest switch group

S109

Left front multicontour backrest switch group

8

Electrical connector

9

Electrical connector

10

Pneumatic line

N32/1

Left front seat control unit

N32/2

Right front seat control unit

 

Remove/install

 Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Topical note

Notes on performing repair, body work and welding on vehicles with airbags and RTE units

AH91.00-P-0002-01M

Topical note

Notes on seat occupied recognition

Model 240.1 as of 9/1/06
with code 215 (Partition)
with code 494 (US version)
BeifahrersitzModel 240.1 as of 9/1/06
with code 302 (Partition screen with clear glass)
with code 494 (US version)
BeifahrersitzModel 240.1 as of 9/1/06
with code 303 (Partition with clear window and curtain)
with code 494 (US version)Beifahrersitz

AH91.60-P-0760-01P

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Assessment of airbag and belt tensioner units in accident vehicles

AH91.00-P-0006-01B

Legal requirements on handling and storing airbags and emergency tensioning retractor units

AH91.00-P-0004-01A

1

Remove head restraint from left or right front seat (1)

AR91.16-P-0040H

2

Remove door sill molding from left and right front door

AR68.30-P-4100H

3

Move steering wheel all the way up and to the front

When removing driver seat.

4

Move front seat (1) forward and move backrest to upright position

5

Unclip and remove covers (7)

 Mounting wedge

*110589035900

6

Remove bolts (6)

 Bolt, seat to vehicle floor

*BA91.10-P-1007-01A

7

Unclip trim (5) and pull out toward rear

 Mounting wedge

*110589035900

8

Position front seat (1) to rear

9

Unclip and remove covers (3)

 Mounting wedge

*110589035900

10

Remove screws (2)

 Bolt, seat to vehicle floor

*BA91.10-P-1007-01A

11

Unclip trim (4) and pull out toward front

 Mounting wedge

*110589035900

12

Disconnect battery ground line

AR54.10-P-0003H

13

Tilt front seat (1) far enough backward until electrical connectors (8, 9) are accessible

14

Disconnect electrical connector (9) from left front seat control unit (N32/1) or right front seat control unit (N32/2)

15

Disconnect pneumatic line (10)

16

Disconnect electrical connector (8)

17

Cover door cutout, trim on B-pillar and center console with protective covers


This protects these component parts against damage when front seat (1) is being removed
.

18

Lift front seat (1) and rotate with front section by 90° relative to front door cutout

19

Remove front seat (1)


Carefully remove front seat (1) with 2 persons, making sure that door cutout and door lining are not damaged. Place front seat (1) on a suitable, clean surface.
This prevents damage.

20

Install in the reverse order

 Front seats

Number

Designation

Model 240

BA91.10-P-1007-01A

Bolt, seat to vehicle floor

Nm

45