Removing and installing electric easy entry assist, driver seat

AR91.10-L-9500VA

Removing and installing electric easy entry assist, driver seat

16.2.12

 

Remove/Install

1

Remove folding wheelchair

 Extend loading system, unlock wheelchair retaining bracket (1) and move wheelchair to side.

2

Retract loading system

 Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

3

Disconnect ground cable of battery

AR54.10-P-0003A



Notes on battery

All models

AH54.10-P-0001-01A

4

Slide driver seat forwards, move driver's seat backrest upright and raise electric easy entry feature (3)

5

Disconnect electrical connector at voltage converter behind driver seat

6

Unscrew bolt (2)



*BA91.10-P-1021-01A

7

Push electric easy entry feature (3) beneath loading system base plate (direction of arrow) and lift out

 Avoid damaging A-pillar paneling and driver seat.

 Installation: Ensure that seat belt is correctly positioned. Belt must move freely.

8

Install in the reverse order

9

Perform basic programming

AR54.10-P-0003A

10

Read diagnostic trouble code memory and erase

 When the work is complete stored faults must be worked on in the diagnostic trouble code memories and erased. The stored faults may be caused by removed cables during installation or test operations or by simulation.

See 



Connect STAR DIAGNOSIS, read out fault memory

AD00.00-P-2000-04A

Diagnosis system STAR DIAGNOSIS

*WH58.30-Z-1048-13A

11

Perform function check

Number

Designation

Model
414.700

BA91.10-P-1021-01A

Screw, easy entry feature

Nm

25

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00