ar9110l1025va

Removing/installing the swiveling front passenger lift seat

Typ ar · temat 91.10 · wersja 0101 · 2012-02-24

Dotyczy: MODELS 414.700 with CODE (ZY5), swiveling front passenger lift seat for handicapped vehicle "Movability"

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.10 Fotele przednie — Seria 414 (modele 700)

EinPAS 37 Wyposażenie wnętrza › 37.26 Fotel przedni › 37.26.30 Fotel przedni kompletny — Seria 414 (modele 700)

AR91.10-L-1025VA

Removing/installing the swiveling front passenger lift seat

16.2.12

MODELS 414.700 with CODE (ZY5), swiveling front passenger lift seat for handicapped vehicle "Movability"

Removing/installing the swiveling front passenger lift seat

N91.10-2186-09

1 Bolts

2 Locking lever

X55/4 Front passenger seat connector

3 Swiveling front passenger lift seat

Remove/Install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect ground cable of battery

AR54.10-P-0003A

Notes on battery

All models

AH54.10-P-0001-01A

2

Remove the mounting screws (1) attaching at the front of the seat to the vehicle floor.

*BA91.10-P-1007-01A

3

Swivel the front passenger lift seat (3) toward the outside of the vehicle

Operate the locking lever (2).

4

Separate the tie straps at the right-side B-pillar

5

Unplug the plug connector for the front passenger seat (X55/4)

6

Remove the mounting screws (1) attaching at the rear of the seat to the vehicle floor.

*BA91.10-P-1007-01A

7

Swivel the front passenger lift seat (3) towards the inside and engage it in position.

Operate the locking lever (2).

8

Remove the swiveling front passenger lift seat (3)

Caution: Take care not to damage the interior trim and the seat.

9

Install in the reverse order

10

Perform basic programming

AR54.10-P-0003A

11

Read diagnostic trouble code memory and erase

When the work is complete stored faults must be worked on in the diagnostic trouble code memories and erased. The stored faults may be caused by removed cables during installation or test operations or by simulation.

Connect STAR DIAGNOSIS, read out fault memory

AD00.00-P-2000-04A

Diagnosis system STAR DIAGNOSIS

*WH58.30-Z-1048-13A

12

Perform function check

Front seats

Number

Designation

Model
414.700

BA91.10-P-1007-01A

Seat bolt to vehicle floor

Nm

45

Commercially available tools

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00

Powiązane dokumenty