ar9110d1916ts

Remove/install seat backrest shell for front seat

Typ ar · temat 91.10 · wersja 0101 · 2018-08-31

Dotyczy: Model 907, 910 with code SH1 (Thorax/pelvis side-impact airbag, driver) Model 907, 910 with code SH2 (Thorax/pelvis side-impact airbag, front passenger)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.10 Fotele przednie — Seria 907 · Seria 910

EinPAS 37 Wyposażenie wnętrza › 37.26 Fotel przedni › 37.26.70 Okładzina/ schowki — Seria 907 · Seria 910

AR91.10-D-1916TS

Remove/install seat backrest shell for front seat

15.08.2018

Model

907, 910

with code SH1 (Thorax/pelvis side-impact airbag, driver)

Model

907, 910

with code SH2 (Thorax/pelvis side-impact airbag, front passenger)

Remove/install seat backrest shell for front seat

Shown on removed driver's seat with code SF1 (Electrically adjustable driver's seat) with code SZ7 (Driver seat backrest stowage net)

1

Front seat

2

Seat backrest shell

3

Bolts

4

Catch hook

5

Guides

D91.10-0121-06

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Adjust front seat (1) forward.

Model 907.6, 910.6 with code D50 (Full-width partition wall), model 907.6, 910.6 with code D51 (Full-width partition wall with 1 window)

2

Tilt seat backrest all the way forward.

3

Remove screws (3) from seat backrest shell (2).

4

Remove seat backrest shell (2).

To do so, pull seat backrest shell (2) in lower area downwards, then remove front seat (1) towards rear.

Installation: Check that seat backrest shell (2) is correctly seated into place. Check catch hooks (4) and guides (5).

In the case of a corresponding finding,

Replace seat backrest shell (2).

5

Install in the reverse order.

Powiązane dokumenty