1 | Bracket |
2 | Trim piece |
3 | Seal |
S88.85-4530-06
| Remove | ||
1 | Insert a suitable, stable plastic wedge in area of brackets (1) between trim piece (2) and seal (3) from above, and unclip trim piece (2) | ||
| Check | ||
2 | Ensure that bracket (1) is seated correctly on seal (3) | If a bracket (1) remains on trim piece (2) after removal, or is partially detached from seal. | |
| |||
Fasten bracket (1) to seal (3). | |||
| Install | ||
3 | Spray seal on trim piece (2) with soapy water | ||
4 | Insert trim piece (2) in front part (arrow A) of seal (3) and clip into brackets (1) | |