ar8885s5474e

Remove, install trim on rear pillar

Typ ar · temat 88.85 · wersja 0100 · 2014-05-10

Dotyczy: MODEL 447 with CODE W50 (Rear-end door, double-wing, 180 degrees without window) MODEL 447 with CODE W54 (Hinged rear doors, opening to side wall)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 88 Części dobudowane, klapy zewnętrzne › 88.85 Listwy ozdobne — Seria 447

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.38 Zderzak/spojler/okładzina zewnętrzna/schowek/przednie zabezpieczenie › 35.38.44 Okładzina/element ozdobny/osłona przednia — Seria 447

AR88.85-S-5474E

Remove, install trim on rear pillar

05.05.2014

MODEL

447

with CODE W50 (Rear-end door, double-wing, 180 degrees without window)

MODEL

447

with CODE W54 (Hinged rear doors, opening to side wall)

Remove, install trim on rear pillar

S88.85-4527-09

Shown on right side of vehicle

1

Trim piece

4

Bolts

2

Cover

5

Retaining clip

3

Door catch strap

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove

1

Open corresponding rear-end door and unhook door check strap (3)

2

Remove cover (2)

3

Remove screws (4)

4

Pull trim piece (1) toward rear and remove

Install

5

Position mount (arrows) on trim piece (1) on corresponding retaining clip (5) and position trim piece (1)

6

Align trim piece (1) along vehicle contour and tighten with bolts (4)

7

Install cover (2)

8

Hook in door check strap (3) and close corresponding rear-end door

Powiązane dokumenty