AR88.80-P-6000R | Remove/install longitudinal member paneling | 30.10.08 |
MODEL 230.4 except CODE (P99) "AMG Black Series" special model
P88.80-2032-09
1 Longitudinal member paneling
2 Expansion rivet
3 Expansion rivet
7 Bolts
8 Terminal strip
9 Front fender
4 Trim
5 Edge guard
6 Door sill molding
| Remove/install | ||
1 | Remove left and right paneling (4) | Installation: Ensure that retaining clips are positioned correctly. | |
| |||
2 | Loosen edge guard (5) in entrance area | ||
3 | Unclip door sill molding (6) | Installation: Replace damaged mounting clips. | |
| |||
4 | Remove underfloor paneling | ||
5 | Remove expansion rivets (2) from longitudinal member paneling (1) | ||
6 | Remove expansion rivets (3) on front and rear fender liner | ||
7 | Remove bolts (7) | ||
8 | Press longitudinal member paneling (1) toward outside from front and rear terminal strip (8) | Pry off longitudinal member panel (1) carefully otherwise the catch hooks may break off. | |
| |||
Installation: Arrest longitudinal member paneling (1) in front and rear terminal strip (8). | |||
9 | Install in the reverse order |
Mounting wedge
110 589 03 59 00