ar8850p5000r

Remove/install trunk lid

Typ ar · temat 88.50 · wersja 0104 · 2008-11-21

Dotyczy: MODEL 230.4 except CODE (P99) "AMG Black Series" special model

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 88 Części dobudowane, klapy zewnętrzne › 88.50 Pokrywa tylna — Seria 230 (modele 4**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.36 Pokrywa/ klapa › 35.36.33 Klapa tylna/ klapa bagażnika — Seria 230 (modele 4**)

AR88.50-P-5000R

Remove/install trunk lid

30.10.08

MODEL 230.4 except CODE (P99) "AMG Black Series" special model

Remove/install trunk lid

P88.50-2284-09

1 Trunk lid

2 Side flap drive

3 Trunk lid lock

4 Electrical connectors

8 Left hinge bracket

E21 Center high-mounted stop lamp

5 Wiring harness

6 Nuts

7 Right hinge bracket

Removing

Danger!

Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof

Keep body parts and limbs well clear of moving parts.

AS00.00-Z-0011-01A

1

Remove side flap drive (2) for Vario roof

AR77.30-P-6374R

2

Remove hydraulic distributor and associated hydraulic lines from trunk lid (1)

On vehicles with code (881) Remote trunk closing (RTC)

Observe installation position for hydraulic lines and do not separate hydraulic lines from hydraulic distributor.

AR88.50-P-5072R

3

Remove trunk lid lock (3)

AR88.50-P-5020R

4

Separate electrical connectors (4)

5

Disconnect electrical connector from
center high-mounted stop lamp (E21)

6

Expose wiring harness (5) on trunk lid (1)

Until all nuts (6) on right hinge bracket (7) are accessible.

7

Mark installation position of left hinge bracket (8) and right hinge bracket (7) on trunk lid (1), unscrew nuts (6) and remove trunk lid (1) with aid of helper

Install

8

Place trunk lid (1) on left hinge lever (8) and right hinge lever (7) with aid of helper and tighten nuts (6) until the trunk (1) is fixed in place.

If installation marks are not present, fix trunk lid (1) at rear-most position on left hinge lever (8) and right hinge lever (7) in place, otherwise the trunk lid (1) can collide with the C-pillars.

9

Connect electrical connector on
center high-mounted stop lamp (E21)

10

Install and adjust trunk lid lock (3)

AR88.50-P-5020R

11

Adjust trunk lid (1)

Vehicles up to end no. 063909

AR88.50-P-5200R

Vehicles as of end no. 063910

AR88.50-P-5200RA

12

Fasten wiring harness (5) to trunk lid (1)

Replace cable ties.

13

Install hydraulic distributor and associated hydraulic lines on trunk lid (1).

On vehicles with code (881) Remote trunk closing (RTC)

Observe installation position for hydraulic lines. Replace cable tie.

AR88.50-P-5072R

14

Install side flap drive (2) for Vario roof

AR77.30-P-6374R

Powiązane dokumenty