Shown on left side of vehicle |
1 | Gas-operated strut |
2 | Groove |
3 | Fuse |
S88.40-4531-05
| Remove/install | ||
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
Danger ! | Risk of injury from fingers being pinched or jammed when working on gas struts under pressure | Only remove and install pneumatic springs when they are not under tension and when the components are properly secured. | |
1 | Open engine hood | When removing gas-filled struts (1) simultaneously, secure engine hood against folding down with aid of second person. | |
2 | Remove gas-operated strut (1) | | |
For this purpose slide screwdriver intro groove (2), lift retainer (3) and unclip gas-filled strut (1) from mounts. | |||
Installation: Pay attention to installation position of gas-operated strut (1). Clip gas-filled strut (1) into mounts with retainer (3) installed. | |||
3 | Install in the reverse order |
Powiązane dokumenty
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.
- as0000z001201a Niebezpieczeństwo obrażeń na skutek zakleszczenia lub zmiażdżenia podczas czynności przy wstępnie naprężonych sprężynach gazowych.