ar8840s2545c

Remove/install soundproofing on engine hood

Typ ar · temat 88.40 · wersja 0100 · 2012-09-28

Dotyczy: MODEL 415

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 88 Części dobudowane, klapy zewnętrzne › 88.40 Pokrywa komory silnika, pokrywa przednia — Seria 415

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.25 Element tłumiący/okładzina dolna/uszczelnienie/osłona dolna › 35.25.40 Wygłuszenie/ ekranowanie/ mata tłumiąca — Seria 415

AR88.40-S-2545C

Remove/install soundproofing on engine hood

19.09.2012

MODEL

415

Remove/install soundproofing on engine hood

S88.40-4532-09

1

Engine hood

3

Damping material

2

Clips

4

Guides

Remove/install

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

1

Open engine hood (1)

2

Remove clips (2) from soundproofing (3)

For this purpose use suitable tool.

Installation: Check clips (2), replace if necessary.

3

Remove soundproofing (3) from engine hood (1)

Installation: Insert soundproofing (3) into guides (4) on engine hood (1) with lugs.

4

Install in the reverse order

Powiązane dokumenty