D88.40-1132-08
1 | Hood support | 3 | Bracket | |
2 | Bracket | 4 | Engine hood |
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Remove/install | ||
1 | Hold hood (4) in opened position | Secure hood (4) against falling down. | |
2 | Remove hood support (1) from bracket (3) | ||
3 | Remove bracket (3) | For this purpose, unclip bracket (3). | |
Installation: Check bracket (3) for damage. | |||
Clip remover | |||
Depending on findings | |||
| |||
Replace damaged bracket (3). | |||
4 | Remove hood support (1) | For this purpose, remove hood support (1) from bracket (2). | |
5 | Remove bracket (2) | For this purpose, press bracket (2) together in rear area and guide out of bore. | |
Installation: Check bracket (2) for damage. | |||
Depending on findings | |||
| |||
Replace damaged bracket (2). | |||
6 | Install in the reverse order |
452 589 01 63 00
Clip remover
Powiązane dokumenty
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.