ar8820p2000ga

Remove/install front bumper

Typ ar · temat 88.20 · wersja 0101 · 2009-11-09

Dotyczy: MODEL 170 as of 1.2.00

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 88 Części dobudowane, klapy zewnętrzne › 88.20 Zderzak — Seria 170

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.38 Zderzak/spojler/okładzina zewnętrzna/schowek/przednie zabezpieczenie › 35.38.30 Zderzak przedni — Seria 170

AR88.20-P-2000GA

Remove/install front bumper

27.10.09

MODEL 170 as of 1.2.00

Remove/install front bumper

P88.20-2118-09

1 Bumper

2 Screw

4 Nut

5 Screw

10 Outside temperature sensor connector

11 Nu

6 Washer

7 Turn signal lamp

9 Front fog lamp connector

Remove/install

1

Remove left and right turn signal lamps (7)

Press lock tab on turn signal lamp downward.

AR82.10-P-4725C

2

Unscrew bolts (2) on left and right

3

Disconnect connectors (9) front left and right front fog lamps

The connectors are accessible through an opening in the wheel well cover in the front fender.

4

Unscrew bolts (see arrows) from inner trim

5

Remove engine compartment paneling

AR61.20-P-1105A

6

Disconnect connector (10) from outside temperature sensor

7

Unscrew nut (4) on left and right from crossmember

*BA88.20-P-1001-01A

8

Unscrew bolt (5) with washer (6) on both sides

9

Unscrew nuts (11) on both sides

10

Remove bumper (1)

When removing slightly pull bumper downward to prevent paint damage.

The bumper is clipped in in the area of the radiator grille.

11

Install in the reverse order

Bumper

Number

Designation

Model 170

BA88.20-P-1001-01A

Nut, front bumper to crossmember

Nm

10

Powiązane dokumenty