P88.20-0286-09
1 Bumper
2 Screw
3 Washer
4 Nut
10 Connector for outsidetemperature sensor
11 Screw
12 Nut
5 Screw
6 Washer
7 Turn signal lamp
9 Connector for front fog lamp
Modification notes
30.4.98 | "Remove wheels" removed | Previously step 2 | |
30.4.98 | "Remove wheel well cover in front fender" removed | Previously step 5 | |
30.4.98 | Clip replaced with bolt (11) with collar nut (12) | Step 6 |
| Remove/install | ||
1 | Open engine hood | ||
2 | Disconnect connectors from turn signal lamp (7) on right and left | ||
3 | Remove right and left turn signal lamp (7) | Thereby press lock tab for turn signal lamp to side | |
4 | Disconnect connectors (9) from right and left front fog lamp | The connectors are accessible through an opening in the wheel well cover in the front fender. | |
5 | Disconnect connector (10) from outside temperature sensor | With code (240a) Outside temperature indicator | |
6 | Turn out screws (11) on both sides | Hold nut (12) steady. | |
7 | Unscrew bolts (2 and 5) on both sides and remove washers (3 and 6 | ||
8 | Unscrew nuts (4) on both sides | | |
9 | Remove bumper (1) | When removing bumper pull down slightly to prevent damaging paint. | |
10 | Modify AMG bumper | See installation instructions for accessories: | |
Retrofit AMG trim parts | |||
11 | Install in the reverse order |
Bumper