AR88.20-D-2200NA | Remove/install rear bumper | 15.10.02 |
MODEL WD1, WD2, WD3, WD6, WD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
MODEL 903.66 /67, 904.66 with CODE (ZU7) National version for Canada
MODEL 903.66 /67, 904.66 with CODE (ZU8) National version for USA
MODEL 903.66 /67, 904.66 with CODE (ZU9) National version for Mexico
D88.00-0005-06
1 Bumpers
2 Reflector
3 Phillips screws
4 Collar bolt
5 Bumper support bracket
6 Corner pillar mount
A88.20-0001-01
Only with code W73: Tailgate step
7 Plastic clamp
8 Dowel pin
| Remove/install | ||
1 | Unscrew reflector (2) and collar bolts (4) | Installation: Replace micro-encapsulated collar bolt (4) | |
| |||
2 | Unclip bumper support brackets (5) below end panel | ||
3.1 | Remove plastic clamps (7) | With code W73, rear door step. | |
Press the dowel pin (8) of the plastic clamp (7) inward. | |||
4 | Remove bumper | Installation: The corner parts of the bumper are inserted in the mounts (6) of the corner pillars (not screwed). | |
5 | Install in the reverse order |
Bumper