Shown on left side of vehicle |
1 | Bumper |
2 | Reflector |
3 | Screw |
4 | Screw |
5 | Bumper support |
6 | Corner pillar mounting |
D88.20-1119-06
On MODEL 909.6 with CODE W73 (rear-end door step) |
7 | Expansion clip |
8 | Dowel pin |
A88.20-0001-01
| Remove/install | ||
1 | Unscrew bolts (3) and remove reflector (2) | ||
2 | Remove screws/bolts (4) | Installation: Replace self-locking bolts (4). | |
Collar screw, rear bumper to body | |||
3 | Unclip bumper support brackets (5) below end panel | On MODEL 909.6 with CODE W73 (rear-end door step), press dowel pins (8) on expansion clips (7) inward. | |
4 | Move bumper (1) out of corner pillar mounts (6) and remove bumper (1) | ||
5 | Install in the reverse order |