ar8810p1400rk

Remove/install fender liner in rear fender

Typ ar · temat 88.10 · wersja 0101 · 2018-09-13

Dotyczy: Model 231

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 88 Części dobudowane, klapy zewnętrzne › 88.10 Błotnik — Seria 231

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.37 Błotnik › 35.37.40 Błotnik wewnętrzny — Seria 231

AR88.10-P-1400RK

Remove/install fender liner in rear fender

13.09.2018

Model

231

Remove/install fender liner in rear fender

Shown on removed rear wheel

1

Fender liner

2

Nut

3

Expansion clip

4

Screw

P88.10-2275-06

Remove/install fender liner in rear fender

Shown on removed rear wheel

1

Fender liner

2

Nut

3

Expansion clip

P88.10-2276-06

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Remove/install

1

Lift vehicle on vehicle lift

AR00.60-P-1000TX

2

Remove bolt (4)

3

Remove expansion clips (3)

Installation: Check expansion clips (3), replace if required.

4

Unscrew nuts (2)

5

Pull outer edge of fender liner (1) toward inside from fender edge and remove fender liner (1) downward

6

Install in the reverse order

Powiązane dokumenty