S86.61-4518-09
1 | Control unit | 5 | Screw | |
2 | Electrical plug | 6 | Electrical connector | |
3 | Compressor tachometer | 7 | Expansion vessel | |
4 | Screw |
Danger ! | Risk of injury caused by damaged assemblies filled with refrigerant | Wear protective clothing, safety gloves and safety glasses. | |
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Switch off ignition and remove transmitter key | ||
2 | Remove compressor tachometer (3) for kitchenette refrigerator box from control unit (1) | ||
Removal: Do not remove electrical connector from compressor tachometer (3). | |||
3 | Mark assembly position for electrical connector (2) on control unit (1) | ||
4 | Remove electrical plugs (2) | Installation: Observe markings. | |
5 | Remove screw (5) | ||
6 | Unscrew bolt (4) | The bolt (4) is accessible through the opening in the kitchenette for bolt (5). | |
7 | Remove control unit (1) until electrical connector (6) is accessible | ||
8 | Remove electrical connector (6) toward front from expansion vessel (7) and remove control unit (1) | ||
9 | Install in the reverse order | ||
| Check | ||
10 | Check refrigerator box for proper function | The refrigerator box temperature can be read off of the central electronics display unit in the cockpit. |
Powiązane dokumenty
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ar8661s2367e
- as8661z000101a Niebezpieczeństwo obrażeń w wyniku uszkodzenia podzespołów napełnionych środkiemchłodzącym.