S86.60-4640-09
1 | Support brace | 4 | Carrier foils | |
2 | Hinge | 5 | Magnet | |
3 | Table | 6 | plate |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove | ||
1 | Remove table (3) and lay down on clean base with top pointing upward | ||
2 | Fold up support (1) on table (3) | ||
3 | Mark assembly position for hinge (2) on table (3) | ||
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
4 | Slightly heat hinge (2) with hot air blower | ||
5 | Remove hinge (2) together with support (1) from table (3) | ||
| Clean | ||
6 | Clean table (3) in area of bonding surface of hinge (2) | Do not remove markings. | |
Assembly cleaner | |||
| Install | ||
7 | Replace adhesive strips on hinge (2) | If support (1) has not been replaced. | |
Use double-sided commercially available adhesive strips. | |||
8 | Remove carrier foils (4) | ||
9 | Position support (1) on table (3) and glue on | Observe markings. | |
| Clean | ||
10 | Remove markings from table (3) | ||
| Check | ||
11 | Check folding mechanism on support (1) | ||
12 | Check whether plate (6) on support (1) is positioned correctly in relation to magnet (5) on table (3) | If support (1) has been replaced. | |
If the magnet (5) does not coincide with the plate (6). | |||
| |||
Remove magnet (5), clean assembly position and glue on new magnet (5) | |||
Assembly cleaner | |||
| Install | ||
13 | Install table (3) |
Powiązane dokumenty
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ar8660s0030e
- as0000z000201a Niebezpieczeństwo zranienia skóry i oczy na skutek kontaktu z gorącymi lub żarzącymi się przedmiotami