S86.30-4549-09
Shown removed kitchenette |
1 | Shutoff cock | 4 | Fitting | |
2 | Wastewater hose | 5 | Fitting | |
3 | Wastewater hose |
| Remove | ||
1 | Empty wastewater container | ||
2 | Remove paneling from kitchenette below cover of refrigerator box | ||
3 | Remove wastewater hose (2) from fitting (5) | ||
4 | Remove wastewater hose (3) from fitting (4) and guide out shutoff valve (1) | ||
| Disassemble | ||
5 | Remove fitting (4, 5) from shutoff valve (1) | If fitting (4, 5) or shutoff valve (1) is replaced. | |
Note the assembly position of fitting (5). | |||
| Clean | ||
6 | Clean thread for fitting (4, 5) on shutoff valve (1) | If shutoff valve (1) is reused. | |
7 | Clean thread on fitting (4, 5) | If fitting (4, 5) is reinstalled. | |
| Assemble | ||
8 | Install fitting (4, 5) with seal strip on shutoff valve (1) | If fitting (4, 5) or shutoff valve (1) is replaced. | |
Note the assembly position of fitting (5). | |||
Pre-compressed seal strip | |||
| Install | ||
9 | Install wastewater hose (3) on fitting (4) | ||
10 | Install wastewater hose (2) on fitting (5) | ||
| Check | ||
11 | Fill wastewater container and check area of shutoff valve (1) for leakage | ||
12 | Empty wastewater container | ||
13 | Install paneling of kitchenette below cover of refrigerator box |