ar8370s7000b

Removing and installing heater unit exhaust system

Typ ar · temat 83.70 · wersja 0101 · 2000-03-06

Dotyczy: MODEL 638 as of 13.10.97 with CODE (H12) Warm water auxiliary heater D5WS or B5WS MODEL 638 with ENGINE 611.980 except CODE (H92) Deletion of heater booster

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.70 Ogrzewanie w czasie postoju, dodatkowe, nagrzewnica dodatkowa — Seria 611 (modele 980) · Seria 638

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.25 Ogrzewanie postojowe/ ogrzewanie dodatkowe › 39.25.47 Układ wydechowy — Seria 611 (modele 980) · Seria 638

AR83.70-S-7000B

Removing and installing heater unit exhaust system

9.9.97

MODEL 638 as of 13.10.97 with CODE (H12) Warm water auxiliary heater
D5WS or B5WS

MODEL 638 with ENGINE 611.980 except CODE (H92) Deletion of heater booster

Removing and installing heater unit exhaust system

S83.70-2500-06

1 Screw

2 Exhaust system

3 Mounting

4 Screw

5 Clamp

6 Heater unit

Removing, installing

Danger!

Risk of explosion due to fuel vapors, risk of poisoning from combustion gases and risk of injury through burning during or after heater operation

Do not operate stationary heater, or engine with heater booster in enclosed areas or while filling fuel tank. Allow heater unit to cool down after operation and wear protective gloves.

AS83.70-Z-0002-01A

1

Remove screw (1) of exhaust system (2)
on mounting (3)

2

Loosen screw (4) of clamp (5) and open clamp

3

Detach exhaust system (2) from heater unit (6)

4

Install in the reverse order

Powiązane dokumenty