ar8370s7000a

Removing and installing exhaust gas system from heater

Typ ar · temat 83.70 · wersja 0104 · 2010-09-15

Dotyczy: MODEL 638.0 /1 /2 up to 15.11.97 with CODE (H12) Hot water auxiliary heater

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.70 Ogrzewanie w czasie postoju, dodatkowe, nagrzewnica dodatkowa — Seria 638 (modele 0**, 1**, 2**)

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.25 Ogrzewanie postojowe/ ogrzewanie dodatkowe › 39.25.47 Układ wydechowy — Seria 638 (modele 0**, 1**, 2**)

AR83.70-S-7000A

Removing and installing exhaust gas system from heater

7.9.10

MODEL 638.0 /1 /2 up to 15.11.97 with CODE (H12) Hot water auxiliary heater

Removing and installing exhaust gas system from heater

S83.70-2000-12

1 Exhaust gas system

2 Screw

3 Clamp

4 Support

Removal, installation

Danger!

Fuel vapors present an explosion hazard. Combustion gases are toxic when inhaled. Heater can cause severe burns during and after operation

Do not start up or operate stationary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves.

AS83.70-Z-0002-01A

1

Lower heater with support

AR83.70-S-5330-01A

*BA83.70-N-1005-01A

2

Unscrew screw (2) from support (4)

3

Slacken clamp (3)

4

Remove exhaust gas system (1)

5

Reinstall in opposite order

Auxiliary heater

Number

Designation

Model
638

BA83.70-N-1005-01A

Support on floor assembly

Nm

8

Powiązane dokumenty