AR83.70-S-5940A | Removing and installing heater control module | 7.9.10 |
MODEL 638.0 /1 /2 up to 15.11.97 with CODE (H12) Hot water auxiliary heater
S83.70-2009-06
1 Screws
2 Protector screw
3 Support plate
A72 Control module
A72.1 Control module connector
| Removal, installation | ||
1 | Disconnect ground lead from battery | Installation: Code radio and set clock See Owner's Manual | |
Danger! | Fuel vapors present an explosion hazard. Combustion gases are toxic when inhaled. Heater can cause severe burns during and after operation | Do not start up or operate stationary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves. | |
2 | Lower heater with bracket | ||
| |||
3 | Unscrew screws (1) | ||
4 | Remove protective lid (2) | ||
5 | Disconnect connectors (A72.1) | ||
6 | Disconnect support plate (3) control module (A72) | ||
7 | Reinstall in opposite order | ||
8 | Carry out an function test |
Auxiliary heater
Powiązane dokumenty
- ar5410s0005a
- ar8370s530202a
- ar8370s533001a
- as8370z000201a Niebezpieczeństwo wybuchu oparów paliwa, niebezpieczeństwo zatrucia na skutek wdychania spalin i niebezpieczeństwo zranienia na skutek poparzenia podczas lub po fazie grzania.