ar8370s001301e

Teach in stationary heater radio remote control transmitter

Typ ar · temat 83.70 · wersja 0100 · 2015-05-02

Dotyczy: Model 447.8 with code H12 (Auxiliary hot-water heater)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.70 Ogrzewanie w czasie postoju, dodatkowe, nagrzewnica dodatkowa — Seria 447 (modele 8**)

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.25 Ogrzewanie postojowe/ ogrzewanie dodatkowe › 39.25.14 Nadajnik/odbiornik — Seria 447 (modele 8**)

AR83.70-S-0013-01E

Teach in stationary heater radio remote control transmitter

Model

447.8

with code H12 (Auxiliary hot-water heater)

Teach in stationary heater radio remote control transmitter

S83.70-4703-08

Teach-in is only necessary when replacing the stationary heater hot water radio remote control transmitter (A8/2) or the stationary heater radio remote control receiver.

1

Press the stationary heater button (S98/1s12) on the FRONT heater/A/C operating unit switch (S98/1) for approx. 20 s.

2

As soon as the red indicator lamp in the stationary heater button (S98/1s12) flashes, press and hold (for at least 1 s) the "OFF" button (A) on the stationary heater hot water radio remote control transmitter (A8/2), until the display (B) shows the "OFF" message.

To teach in another stationary heater hot water radio remote control transmitter (A8/2), the teach-in process must be carried out again. The stationary heater radio remote control receiver can store up to three stationary heater hot water radio remote control transmitters (A8/2). If a fourth transmitter is to be stored, the first transmitter that was taught in is overwritten. Optionally, a teach-in window can be opened using the diagnostic system and the number of teach-in processes can be read out.