ar8370p1177tx

Check emission level, adjust if necessary

Typ ar · temat 83.70 · wersja 0201 · 2011-12-08

Dotyczy: MODEL 219.3 with CODE (228) Stationary heater

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.70 Ogrzewanie w czasie postoju, dodatkowe, nagrzewnica dodatkowa — Seria 219 (modele 3**)

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.25 Ogrzewanie postojowe/ ogrzewanie dodatkowe › 39.25.47 Układ wydechowy — Seria 219 (modele 3**)

AR83.70-P-1177TX

Check emission level, adjust if necessary

11.11.11

MODEL 219.3 with CODE (228) Stationary heater

Check emission level, adjust if necessary

P83.70-4903-04

1 Exhaust tailpipe

A6 STH heater unit

Modification notes

22.1.09

Value changed: CO2 value in exhaust (gasoline)

*BE83.70-P-1001-03D

Value changed: CO2 value in exhaust (diesel)

*BE83.70-P-1002-03D

Checking

Danger!

Risk of explosion caused by fuel vapors igniting, risk of poisoning caused by inhaling combustible gases and risk of injury caused by burns during and after operation of heater unit

Do not operate stationary heater, auxiliary heater or engine with heater booster in closed areas or when refueling. Allow heater unit to cool down after operation and wear protective gloves.

AS83.70-Z-0002-01A

1

Set vehicle heating to maximum temperature setting using the AAC [KLA] control and operating unit or the comfort AAC [KLA] control and operating unit

Depending on equipment.

2

Switch on the stationary heater using the STH switch or the radio remote control transmitter

The stationary heater must be operating at full power in order to test the emission level. The coolant temperature must therefore be below 30 oC when the heater is started.

3

Insert measuring probe of gauge into tailpipe (1) of STH heater unit (A6)

Exhaust analyzer (four-gas measuring device, exhaust emissions inspection measuring device)
gotis://D_07.6_01.0

4

Check CO2 value in exhaust

With stationary heater operating at full power.

Vehicles with gasoline engines

*BE83.70-P-1001-03D

Vehicles with diesel engines

*BE83.70-P-1002-03D

5

Switch off the stationary heater using the STH switch or the radio remote control transmitter

Adjust

6

Adjust emission level using STAR DIAGNOSIS

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

STAR DIAGNOSIS diagnosis system

Stationary heater unit test values

Number

Designation

Model
219.3 with Thermo Top C heater unit

BE83.70-P-1001-03D

CO2 value in exhaust gas (gasoline)

Wide open throttle operation

vol %

8.4 to 12

BE83.70-P-1002-03D

CO2 value in exhaust gas (diesel)

Wide open throttle operation

vol %

8.8 to 13

Powiązane dokumenty