Remove and install Telestart receiver

AR83.70-P-0003TX

13.7.06

MODEL 219.3 with CODE (228) Stationary heater

P83.70-4904-06

1 Nuts

2 Antenna line

3 Electrical connector

4 Bracket

5 Locking hooks

A6/1 STH radio remote control receiver

Modification notes

5.7.06

"Disconnect/connect battery ground line" removed

	Removal
1	Remove right side paneling in trunk		AR68.30-P-4800TX
2	Unscrew nuts (1).
3	Detach antenna line (2) and electrical connector (3) of STH radio remote control receiver (A6/1)
4	Remove STH radio remote control receiver (A6/1) with bracket (4) from luggage compartment
5.1	Lift catch (5) of bracket (4) with a flat tip screwdriver and remove bracket (4) from STH radio remote control receiver (A6/1) in direction of arrow	Only when replacing the STH radio remote control receiver (A6/1).
	Install
6.1	Attach bracket (4) to STH radio remote control receiver (A6/1)	Only when replacing the STH radio remote control receiver (A6/1).
7	Position STH radio remote control receiver (A6/1) at installation location and tighten nuts (1)
8	Attach antenna line (2) and electrical connector (3) to STH radio remote control receiver (A6/1)
9	Teach in the STH radio remote control transmitter		AR83.70-P-0003-03TX
10	Install right side paneling in trunk		AR68.30-P-4800TX
11	Switch on STH heater unit with STF radio remote control transmitter	 As soon as the circulation pump and the combustion air blower of the STH heater unit in the vehicle start up and the fuel metering pump is operating, switch the STH heater unit off.