D83.70-1558-79
Shown on model 910 with code XM1 (Noise abatement measures) |
1 | Exhaust system | 4 | Nut | |
2 | Expansion rivet | 5 | Clip | |
3 | Cover | 6 | Screw |
Danger | Risk of explosion caused by fuel vapors igniting, risk of poisoning caused by inhaling combustible gases and risk of injury caused by burns during and after operation of heater unit | Do not operate stationary heater, auxiliary heater or engine with heater booster in closed rooms or when refueling. Allow heater unit to cool down after operation and wear protective gloves. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | To prevent the stationary heater from being switched on unintentionally, keep the Telestart transmitter protected against unauthorized or accidental access for the duration of the work on the stationary heater. | |
2 | Lift vehicle with lifting platform. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
3 | Remove expansion rivets (2) and take off cover (3). | Model 907, 910 with code XM1 (Noise abatement measures) | |
Installation: Reinstall the cover (3) only after the leak test. | |||
Clip remover | |||
4 | Release nut (4). | ||
5 | Release clamp (5). | ||
6 | Remove screw (6) and remove exhaust system (1). | ||
Topical note | Notes on self-locking nuts and bolts | ||
7 | Install in the reverse order. | ||
| Check | ||
8 | Switch on heater and check exhaust system (1) for leaktightness. | Visual inspection. |
452 589 01 63 00
Clip remover
Powiązane dokumenty
- ah0000n000101a Wskazówki dotyczące samozabezpieczających śrub i nakrętek
- ah0060n010001ts Wskazówki dotyczące podnoszenia pojazdu, ustawiania na podporach
- ar0060d100004ts
- as0000z001001a Zagrożenie życia na skutek ześlizgnięcia lub spadnięcia pojazdu z podnośnika.
- as8370z000201a Niebezpieczeństwo wybuchu oparów paliwa, niebezpieczeństwo zatrucia na skutek wdychania spalin i niebezpieczeństwo zranienia na skutek poparzenia podczas lub po fazie grzania.