1 | Antenna |
2 | Connector socket |
3 | Telestart receiver |
D83.70-1542-06
1 | Antenna |
D83.70-1543-76
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove | ||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
2.1 | Remove stowage tray on instrument panel. | Model 907, 910 | |
2.2 | Remove lockable center stowage compartment on instrument panel. | Model 907, 910 | |
3 | Unlock connector socket (2) and remove from Telestart receiver (3). | ||
4 | Strap down antenna (1) and wrap felt tape around it. | The factory-installed antenna (1) remains in the vehicle. | |
Felt strip | |||
| Install | ||
5 | Wrap new antenna (1) with felt tape and fix in place at Telestart receiver (3). | Felt strip | |
6 | Route new antenna (1) above the steering column and guide through the instrument panel with a suitable pull-through aid. | ||
7 | Route new antenna (1) along instrument panel and fix in place using cable ties. | | |
Gray cable tie 3.5 x 150 mm | |||
8.1 | Install stowage tray on instrument panel. | Model 907, 910 | |
8.2 | Install lockable center stowage compartment on instrument panel. | Model 907, 910 | |
| Check | ||
9 | Check stationary heater is ready to receive using the radio remote control. |
Powiązane dokumenty
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ar6810d0003ts
- ar6810d1518ts