ar8370d0014ts

Remove/install stationary heater Telestart receiver

Typ ar · temat 83.70 · wersja 0100 · 2018-09-12

Dotyczy: Model 907, 910 with code H12 (Auxiliary hot-water heater) with code HY1 (Radio remote control for aux. water heater)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.70 Ogrzewanie w czasie postoju, dodatkowe, nagrzewnica dodatkowa — Seria 907 · Seria 910

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.25 Ogrzewanie postojowe/ ogrzewanie dodatkowe › 39.25.14 Nadajnik/odbiornik — Seria 907 · Seria 910

AR83.70-D-0014TS

Remove/install stationary heater Telestart receiver

06.09.2018

Model

907, 910

with code H12 (Auxiliary hot-water heater)

with code HY1 (Radio remote control for aux. water heater)

Remove/install stationary heater Telestart receiver

D83.70-1540-09

1

Telestart receiver

3

Electrical connectors

2

Retaining tab

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Release Telestart receiver (1) at retaining tabs (2) then remove, until the electrical connectors (3) are accessible.

The Telestart receiver (1) can be accessed without any need to remove the trim above the driver footwell.

2

Disconnect electrical connectors (3) and remove Telestart receiver (1).

3

Install in the reverse order.

4

Teach-in Telestart transmitter.

When replacing the Telestart receiver (1).

AR83.70-D-0018-01TS

Check

5

Perform function test of stationary heater.

Powiązane dokumenty