ar8355d5310tsc

Refrigerant compressor, remove/install

Typ ar · temat 83.55 · wersja 0101 · 2019-07-16

Dotyczy: Model 907 with engine 274

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.55 Sprężarka czynnika chłodniczego — Seria 907

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.15 Klimatyzacja › 39.15.40 Sprężarka układu klimatyzacji — Seria 907

Dotyczy też silników/skrzyń biegów: 274 ***

AR83.55-D-5310TSC

Refrigerant compressor, remove/install

15.07.2019

Model

907 with engine 274

Refrigerant compressor, remove/install

D83.55-A000-09

1

Refrigerant compressor

4

Electrical connector

2

Refrigerant line

5

Bolts

3

Screw

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Danger

Risk of fire due to ignition of R1234yf refrigerant on hot components. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with escaped R1234yf refrigerant and when working on pressurized parts. Risk of explosion due to formation of ignitable refrigerant/air mixtures

Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated.

AS83.00-Z-0007-01A

Warning

Risk of poisoning caused by inhaling overheated refrigerant vapors from an air conditioning system containing R134a. Risk of injury to skin and eyes caused by contact with liquid R134a refrigerant and when working on pressurized parts

Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated.

AS83.00-Z-0006-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Procedure for a damaged or leaky air conditioning system

AH83.30-N-0004-01A

Topical note

Protect air conditioning circuit and components from moisture when carrying out repair work

AH83.30-N-0005-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Notes on handling refrigerant R1234yf

AH83.30-P-0003-02A

Notes on handling refrigerant R134a

AH83.30-N-0003-01A

Remove/install

1

Discharge air conditioning system.

AR83.30-D-1760TS

2

Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).

3

Raise vehicle.

Topical note

Special instructions for lifting and supporting vehicle

AH00.60-N-0100-01TS

4

Remove poly-V-belt from belt pulley of refrigerant compressor (1).

AR13.22-D-1202TSC

5

Remove screws (3), remove refrigerant lines (2) from refrigerant compressor (1) and seal with suitable stop plugs.

Compressor oils (specification 362.1)

BB00.40-P-0362-01A


Seal refrigerant lines (2) and refrigerant compressor (1) immediately with suitable stop plugs.
Otherwise the air conditioning system can be damaged.

Installation: Replace sealing rings and moisten with compressor oil.

Bolt, refrigerant line to refrigerant compressor

*BA83.30-N-1002-01TS

Record plug

*129589009100

6

Release and disconnect electrical connector (4).

7

Remove screws (5) and remove refrigerant compressor (1).

Bolt, refrigerant compressor to crankcase and oil pan

*BA83.55-N-1002-02TS

8

Install in the reverse order.

Check

Warning

Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.

Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area.

AS49.00-Z-0001-01A

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

9

Perform engine test run, check air conditioning system for proper operation and leak tightness while doing so.

Air conditioning

Number

Designation

Model 907
Model 910 with engine 651

BA83.30-N-1002-01TS

Bolt, refrigerant line to refrigerant compressor

Nm

20

Refrigerant compressor

Number

Designation

Model 907 with engine 274

BA83.55-N-1002-02TS

Bolt, refrigerant compressor to crankcase and oil pan

Nm

20

Refrigerant compressor, remove/install

129 589 00 91 00

Record plug

Powiązane dokumenty