Remove/install rear air conditioning system operating unit on roof lining

AR83.50-S-9071-01EA

Remove/install rear air conditioning system operating unit on roof lining

Model

447.8

with code D34 (Automatic panoramic sliding sunroof)

with code HZ7 (TEMPMATIC semi-automatic air conditioning in rear)

Model

447.8

with code HZ7 (TEMPMATIC semi-automatic air conditioning in rear)

with code ZK7 (Equipment line MARCO POLO)

Model

448.8

1

Carefully release catch hook (arrow A) of housing (1) using   extraction hook on bracket (2).

2

Carefully release catch hook (arrow B) of housing (1) using   extraction hook on holder (2).

3

Carefully release catch hook (arrow C) of housing (1) using   extraction hook on holder (2).

4

Carefully release catch hooks (arrows D) of housing (1) using   clip remover on holder (2).

5

Disconnect electrical connection (3).

6

Carefully lift up catch hooks (4), tilt REAR heating/air conditioning system operating unit switch (S98/2) in upper area forwards and unhook carefully from catch hooks (5).

When replacing REAR heating/air conditioning system operating unit switch (S98/2).

7

Carefully clip REAR heating/air conditioning system operating unit switch (S98/2) into catch hooks (4, 5).

When replacing REAR heating/air conditioning system operating unit switch (S98/2).

8

Connect electrical connector (3).

9

Carefully position housing (1) from below onto holder (2) and press on until all catch hooks (arrows A, B, C, D) of housing (1) latch into the holder (2).

 Check subharness is correctly routed.
Otherwise, the subharness will be damaged.