Remove/install front low-pressure refrigerant line on underbody

AR83.50-S-6843E

Remove/install front low-pressure refrigerant line on underbody

06.04.2020

Model

447.8 with engine 780.702

with code HZ7 (TEMPMATIC semi-automatic air conditioning in rear)

1

Refrigerant line

2

Nut

3

Screw

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

 Danger

Risk of fire due to ignition of R1234yf refrigerant on hot components. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with escaped R1234yf refrigerant and when working on pressurized parts. Risk of explosion due to formation of ignitable refrigerant/air mixtures

Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated.

AS83.00-Z-0007-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Protect air conditioning circuit and components from moisture when carrying out repair work

AH83.30-N-0005-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

AH00.00-Z-0300-01A

Notes on handling refrigerant R1234yf

AH83.30-P-0003-02A

 

Remove/install

1

Empty refrigerant circuit.

Model 447.8 with engine 780.702 with code HX1 (refrigerant R-1234yf)

AR83.30-S-1760EF

2

Remove cross strut.

AR61.10-S-5139F

3

Remove brackets of refrigerant line (1).

 For this purpose, remove nuts (2).

4

Remove refrigerant line (1).



Compressor oils (specification 362.1)

BB00.40-P-0362-01A

 To do this, remove screws/bolts (3).
Plug openings.

 Installation: Replace sealing rings and coat with compressor oil.

 Screw, refrigerant line to refrigerant line on underbody

*BA83.50-N-1002-01J

 Record plug

*129589009100

5

Install in the reverse order.

 Rear-end air conditioning

Number

Designation

Model 447.7/8
with code HZ7 (TEMPMATIC semi-automatic air conditioning in rear)

BA83.50-N-1002-01J

Screw, refrigerant line to refrigerant line on underbody

Nm

20